Associate Professor Mark Ian Jones

BE(Hons), PhD, PGCert(AcadPrac)

Biography

Associate Professor

Deputy Head Research & Postgraduate

 

  • 2008 -  2013    Senior Lecturer, Department of Chemical & Materials Engineering,  University of Auckland
  • 2011 - Visiting research fellow National Institute of Advanced Industrial Science & Technology (AIST), Japan 
  • 2006-2008 PGCERT ACADPRAC, University of Auckland
  • 2005-2007 - Lecturer, Department of Chemical & Materials Engineering, The University of Auckland
  • 2001-2004 - Research Fellow, National Institute of Advanced Industrial Science & Technology (AIST), Japan (Tribology of Si3N4 and SiAlON Ceramics)
  • 2001-2004 - Member of Japanese National Project “ Joint Consortium of Synergy Ceramics”
  • 1999-2001 STA Research Fellow, National Industrial Research Institute of Nagoya, Japan (Microwave Processing of Si3N4)
  • 1999 - PhD, University of Nottingham, UK (Biomaterials)
  • 1995 - BEng (Hons) 1st Class, Sheffield Hallam University, UK (Materials Engineering)

Research | Current

Research Outputs

Total number of outputs;                                  106

Type of Output

Number

International Refereed Journal

57

Refereed Conference Proceedings

17

Non-Refereed Conference Proceedings

20

Book Contribution:

1

Reviewed article

4

Patents (granted)

1    Japan #4385122

Patents (filed)

1  NZ #600341

Technical Reports

3

Citations: Over 650 citations and an h-index of 13

Research Interests

  • Processing and properties of advanced ceramic materials.
  • Low cost production routes for engineering ceramics.
  • Refractory materials.
  • Ceramic coatings.
  • Wear and high temperature tribology of ceramic materials.
  • Ceramic materials in water treatment / biomaterials.


Publications

International Journal

  1. Rouquie, Y., Jones, MI., “Influence of additives and starting compositions on the nitridation and formation of β and          o-sialons produced by reaction bonding and silicothermal reduction”, J Asian Cer. Soc 1, 53-64 (2013)
  2. Shariffuddin, JH., Jones, MI., Patterson, DA., Greener photocatalysts: Hydroxyapatite derived from waste mussel shells for the photocatalytic degradation of a model Azo dye wastewater  ChERD, 91, 1693-1704, (2013)
  3.  Shimamura, A., Jones, MI., Metson, JB., “Anionic surfactant enhanced Phosphate desorption from Mg/Al-Layered Double Hydroxide by micelle formation”, J. Coll Int Sci, 411, 1-7, (2013)
  4. Yu, C., Jones, MI., “Identification of chloride impurities in hydrogenated -dehydrogenated Kroll-processed titanium powders”, Powder Met. 56, [4], 304-309, (2013)
  5.  Patel, J., Bansal, B., Jones, MI., Hlyand, MMH, “Fouling behaviour of milk and whey protein isolate solution on doped diamond–like carbon coated surfaces” J.Food Eng. 116 [2], 413-421 (2013)
  6. Rouquie, Y., Jones MI., Brown, IWM., White, GW., “Influence of nitrogen overpressure on the nitridation, densification and formation of β sialons produced by silicothermal reduction, J. Eur. Ceram. Soc. 33 [4] 859-867 (2013)
  7. Jones, MI., Hyuga, H., Hirao, K., Yamauchi, Y., “Tribology of silicon based nitride ceramics”.  J. Aus. Ceram. Soc. 48 [1], 21-38 (2012)
  8. Shimamura A., Jones MI., Metson JB., “Intercalation of hydrogen phosphate into Mg/Al layered double hydroxides with DBS” Mod Phys Lett B  26, [19] 1250119 1-6 (2012)
  9. Shimamura, A., Kanezaki, E., Jones, MI., Metson, J., “Direct observation of grafting interlayer phosphate in Mg/Al layered double hydroxides by XRD XPS and FT-IR,” J Sol State Chem 186, 116-123 (2012) DOI:10.1016/j.jssc.2011.11.034
  10. Shimamura, A., Jones, MI., Kanezaki, E., Metson, JB., “Complete desorption of interlayer hydrogen phosphate in Mg/Al layered double hydroxides by means of anion exchange with 1-Octanesulfonate”, J Mat. Sci  47, [3], 1142-1147, (2012)  DOI: 10.1007/s10853-011-5960-3
  11. Kugler, K., Ravlich, I., Jones, MI., “Effects of amount and type of cation species on the phase formation of single and codoped a-SiAlONs”, J Mat. Sci. 47, [3], 1205-1216, (2012)  DOI:10.1007/s10853-011-5681
  12. Little, JE.,Yuan, X., Jones, MI., “Characterisation of voids in fibre reinforced composite materials”, NDT&E International  46, [1], 122-127, (2012) DOI: 10.1016/j.ndteint.2011.11.011
  13. Jones, MI., Wang, L., Abeynaike, A., Patterson, D., Utilization of waste material for environmental applications: Calcination of mussel shells for waste water treatment, Adv Appl, Ceram 110, [5], 280-286 (2011)
  14. Abeynaike, A., Wang, L., Jones, MI.,  Patterson, DA.,  Pyrolysed powdered mussel shells for eutrophication control: Effect of particle size and powder concentration on the mechanism and extent of phosphate removal Asia Pac J Chem Eng, 6, [2], 231-243 (2011)
  15. Hayashi, H., Nakano, H., Jones, MI., “Microstructure and luminescence of Eu-doped Li1+x-yNb1-x-3yTix+4yO3 solid solutions with superstructure”, J. Ceram. Soc. Jpn. 118, [3], 226-230 (2010)
  16. Hyuga H, Jones MI, Yoshida K, Kondo N, Hirao K, Kita H “The influence of a solid lubricant dispersion on tribological behaviour of Si3N4 based composites under water lubrication” J. Ceram. Proc. Res. 10, [3], 367-372 (2009)
  17. Jones MI, Etzion R, Metson J, Zhou Y, Hyuga H, Yoshizawa Y, Hirao K “Corrosion Behavior of Reaction Bonded Si3N4 - SiC and SiAlON - SiC Composites in Simulated Aluminum Smelting Conditions” J.Ceram.Soc. Japan. 116, (6), 712-716, (2008)
  18.  Hyuga H, Amutha Rani D, Jones MI, Yoshizawa Y, Hirao K,  Tribological behavior of Si3N4 and Si3N4/carbon fiber composites against stainless steel under water lubrication for a thrust bearing application, Int J Adv Ceram Tech, 5, (2), 211-218 (2008)
  19. Hyuga H, Jones MI, Yoshizawa Y, Hirao K, Yamauchi Y, Kita H, Yoshida K, The relationship between multiple scratch test and wear behavior of hot-pressed Si3N4 ceramics with various rare-earth additive systems, J.Am.Ceram.Soc91, (1), 192-197, (2008)
  20. Currie, J.A, Harrison, N.R, Wang, L., Jones, M.I.,  Brooks SL “A Preliminary Study of Processing Seafood Shells for Eutrophication Control”, Asia Pac J Chem Eng, 2, [5], 460-467, (2007)
  21. Kaga Y , Jones MI, Hirao K, Kanzaki S  “Effect of the amount of excess oxides on the densification of alpha-SiAlON fabricated via a reaction-bonding process”, J. Mat. Sci. 42, (2), 699-704, (2007)
  22. Sivakumar R, Jones MI, Hirao K, Kanematsu W,  "Scratch behaviour of SiAlON ceramics” J Eur. Ceram. Soc, 26, [3], 351-359 (2006)
  23. Fujita A, Kagami S, Jones MI “Optical characteristics of phosphorescent materials with water-based ceramics”, Proceedings of the 4th International Conference on Advanced Materials Development and PerformanceInt J. Mod. Phys. B. Vol 25-27, 4661-4666, World Scientific (2006)
  24. Hyuga H, Jones MI, Hirao K, Kita H, Yamauchi Y “Influence of carbon fiber additions on friction properties and running-in behavior of silicon nitride based composites under water lubrication”  J.Am.Ceram.Soc, 88, [12], 3474-3477 (2005)
  25. Amutha Rani D, Yoshizawa Y, Jones MI, Hyuga H, Hirao K, Yamauchi Y, "Comparison of tribological behavior between a-Sialon/Si3N4 and Si3N4/Si3N4 sliding pairs in water lubrication ", J.Am.Ceram.Soc, 88, [6], 1655-1658 (2005)
  26. Miyazaki H, Jones MI, Hirao K, "Concentration gradient of solute ions within a-SiAlON grains" Mat. Lett. 59, [1], 44-47, (2005)
  27. Hyuga H, Jones MI, Hirao K, Yamauchi Y “Friction and wear properties of Si3N4 / carbon fiber composites with aligned microstructure”  J.Am.Ceram.Soc, 88, [5], 1239-1243 (2005)
  28. Jones MI, Hyuga H, Hirao K, Yamauchi Y, " Composition and microstructural design for improved wear properties in sialon ceramics ",  Ceram. Eng. Sci. Proc. 25, [4], 161-166, (2004)
  29. Jones MI, Hyuga H, Hirao K, Yamauchi Y, " Effect of rare earth species on the wear properties of a sialon and b silicon nitride ceramics under tribochemical type conditions ",  J. Mat. Res., 19, [9], 2750-2758, (2004)
  30. Jones MI, Hyuga H, Hirao K, Yamauchi Y, "Wear properties under dry sliding of Lu-a sialons with in-situ reinforced microstructures ",  J. Eur. Ceram. Soc. 24, [13], 3581-3589, (2004)
  31. Jones MI, Hirao K, Hyuga H, Yamauchi Y, Shen Z, Nygren M "Wear properties of self-reinforced a-sialon ceramics produced by spark plasma sintering "  Wear, 257, [3-4], 292-296, (2004)
  32. Jones MI, Hyuga H, Hirao K, Yamauchi Y, "Processing and properties of in-situ reinforced a sialons stabilized with Y2O3 and Lu2O3J.Am.Ceram.Soc, 87, [4], 710-713, (2004)
  33. Jones MI, Hyuga H, Hirao K, Yamauchi Y, " Highly transparent  Lu-a sialons”J. Am. Ceram. Soc, 87, [4], 714-716, (2004)
  34. Jones MI, Hyuga H, Hirao K, Yamauchi Y, " Wear behaviour of single phase and composite sialon ceramics stabilized with Y2O3 and Lu2O3J. Eur. Ceram. Soc., 24, [10-11], 3271-3277, (2004)
  35. Jones MI, Hyuga H, Hirao K, Yamauchi Y “Wear properties of sialon ceramics under dry sliding”, J. Cer. Soc. Japan,  Supplement 112-1, 112, [5], S1024-S1028 (2004)
  36. Kanematsu W, Jones MI, Hirao K “Sliding contact damage of Y- a/b composite SiAlON ceramics” Ceram. Eng. Sci. Proc 25, [4], 197-202, (2004)
  37. Hyuga H, Jones MI, Hirao K, Yamauchi Y "Influence of rare earth additives on the wear properties of hot-pressed silicon nitride ceramics under dry sliding conditions" J.Am.Ceram.Soc. 87, [9], 1683-1686, (2004)
  38. Kaga Y, Jones MI, Hirao K, Kanzaki S, "Fabrication of elongated a-SiAlON via a reaction-bonding process, J.Am.Ceram.Soc. 87, [5], 956-959, (2004)
  39. Hyuga H, Jones MI, Hirao K, Yamauchi Y "Fabrication and mechanical properties of Si3N4 / carbon fibre composites with aligned microstructure produced by a seeding and extrusion method " J.Am.Ceram.Soc. 87, [5], 894-899, (2004)
  40. Hyuga H, Jones MI, Hirao K, Yamauchi Y "Tribological behavior of Si3N4/ carbon short fiber composites under water lubrication" J.Am.Ceram.Soc., 87, [4], 699-702, (2004)
  41. Hyuga H, Jones MI, Hirao K, Yamauchi Y, "Influence of sintering conditions on the microstructure and mechanical properties of Si3N4 ceramics with WB addition"  J.Cer.Soc. Japan. 112, [3], 153-158, (2004) (in Japanese)
  42. Hyuga H, Jones MI, Hirao K, Yamauchi Y, "Microstructural characteristics in silicon nitride / W composites by different in-situ processing" Mat. Lett. 58, [1-2], 21-24, (2004)
  43. Hyuga H, Jones MI, Hirao K, Yamauchi Y, Kanzaki, S "Influence of carbon fibre content on the processing and tribological properties of silicon nitride/carbon fibre composites" J.Eur.Ceram.Soc 24, [5], 877-885, (2004)
  44. Hyuga H, Jones MI, Hirao K, Yamauchi Y, "Fabrication and tribological properties of silicon nitride / tungsten composite" J.Cer.Soc. Japan.  Supplement 112-1, 112, [5], S1033-S1037 (2004)
  45. Jones MI, Hyuga H, Hirao K, "Optical and mechanical properties of a / b composite sialons" J. Am. Ceram. Soc, 86, [3], 520-522, (2003)
  46. Jones MI, Hirao K, Hyuga H, Yamauchi Y, Kanzaki S "Wear Properties of Y- a / b Sialon Ceramics"   J. Eur. Ceram. Soc. 23, [10], 1743-1750, (2003)
  47.  Nakamura M, Hirao K, Jones MI, Yamauchi Y, Kanzaki S, "Effect of microstructure of silicon nitride ceramics on wear mechanism" J.Cer.Soc.Japan. 111, [9], 658-663, (2003) (in Japanese)
  48. Hyuga H, Jones MI, Hirao K, Yamauchi Y, "Mechanical and Wear properties of Si3N4-W Composites Using WB Powder" J. Mat. Res. 18, [9], 2262-2267, (2003)
  49. Hyuga H, Hirao K, Jones MI, Yamauchi Y, "Processing and tribological properties of Si3N4 / carbon short fiber composites" J.Am.Ceram.Soc 86, [7], 1081-1087, (2003)
  50. Jones MI, Valecillos MC, Hirao K, Yamauchi Y “Grain growth in microwave sintered Si3N4 ceramics sintered from different starting powders”.  J. Eur. Ceram. Soc. 22, [16], 2981-2988, (2002)
  51. Jones MI, Valecillos MC, Hirao K, Toriyama, M, “Densification behavior in microwave sintered silicon nitride at 28 GHz”. J. Am. Ceram. Soc, 84, [10], 2424-2426 (2001)
  52. Jones MI, Valecillos MC, Hirao K, “Role of specimen insulation on densification and transformation during microwave sintering of silicon nitride”. J. Cer. Soc. Japan,109, [9], 761-765, (2001)
  53.  Kennedy AR, Weston DP, Jones MI, “Reaction in Al-TiC metal matrix composites", Mat. Sci. Eng., A316, 32-38, (2001)
  54. Jones MI, McColl IR, Grant DM, Parker KG, Parker TL, “Protein adsorption and platelet attachment and activation, on TiN, TiC and DLC coatings on titanium for cardiovascular applications”. J. Biomed. Mat. Res., 52, [2], 413-421, (2000).
  55. Jones MI, McColl IR, Grant DM, “Effect of substrate preparation and deposition conditions on the preferred orientation of TiN coatings deposited by RF reactive sputtering.”, Surf. Coat. Tech., 132, [2-3], 143-151, (2000).
  56.  Kennedy AR, Weston DP, Jones MI, Enel C, “Reaction in Al-Ti-C powders and its relation to the formation and stability of TiC in Al at high temperatures", Scripta Mat., 42, 1187-1192, (2000)
  57. Jones MI, McColl IR, Grant DM, Parker KG, Parker TL, “Haemocompatibility of DLC and TiC–TiN interlayers on titanium” Dia. Rel. Mat., 8, [2-5],457-462, (1999).

Selected Conference

  • Jones MI., Lawrie, K., Kugler, K., “Low Cost Processing of Ca-a Sialons” Proceedings of the 6th International Conference on Advanced Materials Development and Performance, Tokushima, Japan, 15-19 July, 2011 International Journal of Modern Physics: Conference Series, [6],  31-36 (2012)
  • Yu, C., Cao, P., Jones, MI., Optimization of Parameters for Pressureless Sintering of Titanium and Ti-6Al-4V Powders by a Taguchi Method, Proceedings of the 12th World Conference on Titanium (Ti-2011) 1719-1721 Science Press Beijing., (2012)
  • Yu, C., Cao, P., Jones, MI.  Effect of contaminants on sintering of C.P. Ti and Ti-6Al-4V pre-alloyed powders in an argon-back-filled graphite furnace, Proceedings of Powder Processing, Consolidation and Metallurgy of Titanium, Brisbane, Australia, 5-7 Dec 2011. Key Eng Mater. Vol 520, 139-145, Trans Tech Publications, Zurich, Switzerland, (2012)
  • Shimamura, A., Perander, L., Kanezaki, E., Jones, MI., Metson, JB., Observation of a collapsing layer structure in Mg/Al layered double hydroxides with interlayer hydrogen phosphate by high temperature In-situ X-ray diffraction with synchrotoron radiation, Fifth International Conference on Advanced Materials and Nanotechnology (AMN-5)., Wellington, New Zealand, 7-11 Feb 2011 Mat Sci Forum., 700, 67-70, Trans Tech Publications, Zurich, Switzerland,  (2012) doi:10.4028/www.scientific.net/MSF.700.67
  • Jones MI., Barakat, H., Patterson, D.A.,Production of hydroxyapatite from waste mussel shells” Proceedings of 3rd International Congress on Ceramics (ICC3) 2011 IOP Conf. Ser.: Mater. Sci. Eng. 18 192002doi:10.1088/1757-899X/18/19/192002
  • Rouquie, Y., Jones MI., “Formation and densification of SiAlON materials by reaction bonding and silicothermal reduction routes” Proceedings of 3rd International Congress on Ceramics (ICC3) 2011 IOP Conf. Ser.: Mater. Sci. Eng. 18 072002 doi: 10.1088/1757-899X/18/7/072002
  • Hayashi, H., Nakano, H., Jones, MI., Microstructure and luminescence of rare earth doped Li(Nb,Ti)O3 solid solutions” Proceedings of 3rd International Congress on Ceramics (ICC3) 2011 IOP Conf. Ser.: Mater. Sci. Eng. 18 082018 doi:10.1088/1757-899X/18/8/082018
  • Jones MI, Patterson D, Hirao K, Hydroxyapatite from mussel shells, Proceedings of the 24th Fall Meeting of the Japan Ceramic Society, Sapporo, Japan, 6-9th Sept 2011 p101
  • Little, JE., Yuan, X., Jones, MI., “Voids characterisation in carbon fibre/epoxy composite laminates” Proceedings Of 18th International Conference On Composite Materials (ICCM18), Jeju Island, Korea, 21-26 August, 2011, M31-6-IF1787
  • Little, JE., Yuan, X., Jones, MI., Quantifying void and fibre architecture in fibre reinforced polymer composites, Proceedings of the 19th International Symposium on Processing and Fabrication of Advanced Materials, Auckland, New Zealand, 14-17 January, 2011 p593-602.
  • Jones, MI, Patterson, D., “Green” engineering: Utilizing waste material for environment and health applications”, Proceedings of the 2nd International On-Board Symposium: Human health, Energy and Environment, Tokushima, Japan, May 2010 pp69-70
  • Patel, J., Jones, MI., Hyland, M., Bansal, B., “Surface modification to reduce dairy fouling” Proceedings of  Fouling and Cleaning in Food Processing, Cambridge, UK 22-24 March (2010)p143-147


Research groups

  • Advanced and nano-materials research cluster
  • High temperature process engineering and materials group
  • Surface and materials science

Teaching | Current

  • CHEMMAT 100G – Materials of the Modern World
  • CHEMMAT 221 – Materials
  • CHEMMAT 322 – Materials Processing & Performance
  • CHEMMAT 753 – Non Metallic Materials
  • CHEMMAT 754 – Materials Engineering
  • CHEMMAT 751 – Research Project
  • CHEMMAT 724 – Advanced Materials Characterisation

Postgraduate supervision

PhDs:

  • Investigating the catalytic properties of hydroxyapatite   
  • Transforming mussel shells into high-value hydroxyapatite adsorbents
  • Layered double hydroxides                                                     
  • A reactivation process for lime using superheated dehydration             
  • Sintering of high performance SiAlON ceramics                                           
  • Sintering of Ti alloy powders                                                                              
  • Surface modification for reduced fouling in the dairy industry       

Masters:          

  • Surface modification of Ti alloys for improved bioactivity                             
  • Use of Seashells for heavy metal adsorption from storm water                 
  • Production of Hydroxyapatite from mussel shells                                          
  • Quantifying void and fibre architecture in fibre reinforced polymer composites    
  • Formation of HA from oyster shells                                                                

Distinctions/Honours

  • Chartered Engineer, (CEng & CPEng)
  • Fellow - Institute of Materials, Minerals and Mining (IOM3)   (CEng / FIMMM)
  • Member - Institute of Professional Engineers New Zealand (CPEng / MIPENZ).
  • Member Royal Society of New Zealand (MRSNZ).

Responsibilities

Current service responsibilities

  • Deputy Head Research & Postgraduate
  • Faculty Academic Programming Committee
  • Faculty Postgraduate Committee
  • Faculty Research Committee
  • Departmental Staff Student Advisory Committee
  • Departmental Seminar Committee 
  • Go8 Project Reviewer
  • Society of Materials New Zealand Incorporated (Chair)

Previous

  • University Student Affairs Committee
  • Faculty Student Issues Committee (Chair  2007-2011)
  • Faculty Timetabling Committee
  • Faculty International Committee
  • Faculty Safety Committee
  • Faculty Social Committee
  • Departmental Safety Committee

 

Reviewing

Editorial Board

ISRN Ceramics, Hindawi Publishing Corporation

Journal Reviewer

  • Journal of the European Ceramic Society
  • Journal of American Ceramic Society
  • International Journal of Advanced Ceramic Technology
  • Ceramics International
  • Journal of Materials Science
  • Materials Letters
  • Wear
  • Connective Tissue Research
  • Journal of Thermal Spray Technology

Conference Reviewer

AMDP 2005, 2007, 2011, ICAMP-4,  AustCeram 05

International Advisory Committee

ISASC 2012

International Technical Committee

AMDP 2011

Organising Committee

Chemeca 2006

Areas of expertise

Research areas

  • Processing and properties of advanced ceramic materials.
  • Low cost production routes for engineering ceramics.
  • Refractory materials.
  • Ceramic coatings.
  • Wear and high temperature tribology of ceramic materials.
  • Ceramic materials in water treatment / biomaterials.

 

Research groups

  • Advanced and nano-materials research cluster.
  • High temperature process engineering and materials group.
  • Surface and materials science.

Committees/Professional groups/Services

Professional affiliations

  • American Ceramic Society.
  • National Institute of Ceramic Engineers.
  • Ceramic Society of Japan
  • Society of Materials New Zealand Incorporated (Chair)

Selected publications and creative works (Research Outputs)

  • Yin, L., & Jones, M. I. (2017). Synthesis of ZrN powders by aluminum-reduction nitridation of ZrO2 powders with CaCO3 additive. Ceramics International, 43 (3), 3183-3189. 10.1016/j.ceramint.2016.11.140
  • Materic, V., Hyland, M., Jones, M. I., & Holt, R. (2014). Investigation of the friability of Ca looping sorbents during and after hydration based reactivation. Fuel, 127, 70-77. 10.1016/j.fuel.2013.09.061
    Other University of Auckland co-authors: Margaret Hyland
  • Materic, V., Holt, R., Hyland, M., & Jones, M. I. (2014). An internally circulating fluid bed for attrition testing of Ca looping sorbents. Fuel, 127, 116-123. 10.1016/j.fuel.2013.10.071
    Other University of Auckland co-authors: Margaret Hyland
  • Materic, V., Hyland, M., Jones, M. I., & Northover, B. (2014). High Temperature Carbonation of Ca(OH) 2 : The Effect of Particle Surface Area and Pore Volume. Industrial & Engineering Chemistry Research, 53 (8), 2994-3000. 10.1021/ie403005s
    Other University of Auckland co-authors: Margaret Hyland
  • ETZION, R., MCINTOSH, G. J., Metson, J. B., & Jones, M. I. (2013). Production of bn-composite materials. Related URL.
    Other University of Auckland co-authors: Ron Etzion, James Metson, Grant McIntosh
  • Shimamura, A., Jones, M. I., & Metson, J. B. (2013). Anionic surfactant enhanced phosphate desorption from Mg/Al-Layered Double Hydroxides by micelle formation. Journal of Colloid and Interface Science, 411, 1-7. 10.1016/j.jcis.2013.08.040
    Other University of Auckland co-authors: James Metson
  • Yu, C. Z., & Jones, M. I. (2013). Investigation of chloride impurities in hydrogenated–dehydrogenated Kroll processed titanium powders. Powder Metallurgy, 56 (4), 304-309. 10.1179/1743290113Y.0000000055
  • Rouquié Y, Jones, M. I., Brown, I. W. M., & White, G. V. (2013). Influence of nitrogen overpressure on the nitridation, densification and formation of β-SiAlONs produced by silicothermal reduction. Journal of the European Ceramic Society, 33 (4), 859-867. 10.1016/j.jeurceramsoc.2012.10.034

Contact details

Primary location

2-6 PARK AVENUE - Bldg 529
Level 1, Room 131
2-6 PARK AVE
GRAFTON
AUCKLAND 1023
New Zealand